This system was specifically designed for the wine bottling industry. Two modes of operation are required in most wine labeling applications.

Modes of Operation:

Single Label Applications:
Single labels (front or back) can be applied to various diameter or height wine bottles. Labels can be oriented specifically to physical characteristics, registration marks or existing graphics.

One applicator required

Front & Back Label Applications: Front & back labeling will require front and back labels to be converted in alternating fashion on the same web. As the indexer rotates each wine bottle, the controller will monitor the product’s rotation and trigger the applicator to apply the labels 180 degrees opposite each other.

One applicator required

Front & back labeling can also be accomplished with two applicators. The front labels would be converted on one roll with the back labels being the product rotation after the first label has been applied.

Two applicators required

Cover Labeling: Cover labeling or re-labeling can be accomplished by sensing the original applied label and applying the new label over the original. The stepper driven indexer will provide very tight tolerance label placement within ± 1/32" (some label materials and bottles may cause label placement tolerances to vary).

One applicator required

Speeds are variable depending on bottle diameters and label lengths.
Unit of Measure

Specifications

Label Placement

N/A ±1/32 in

Modes of Operation

N/A Single Label Applications Front & Back Label Applications Cover Label or Re-Label Applications

 

 

 
 
 
  827 Lincoln Ave, Unit 6– West Chester, PA 19380 | Toll Free : 1.800.745.3530 | Phone : 610.719.8010 | Fax: 610.719.8013
Catalog Index | Terms and Conditions | [email protected]
Apogee Southern U.S. Representative : P.O. BOX 417 Crowley, TX 76036
 
  Copyright © 2011-2014 Apogee Industries Inc.  All Rights Reserved Website by B2B Design & Development LLC