The 360a Series Label Applicator evolved from the industry standard 360 Series Platform. The 360a can be configured as a merge, blow-on or tamp-blow applicator, 5", 7.5" or 10" widths and each module can also be easily switched to the opposite hand with few or no change parts in a minimum amount of time. All units are stepper motor driven to include State-of-the-art electronics and a "Self-teaching" label sensor. File encryption of the 360a allows for easy "on-site" software revisions and upgrades.
Unit of Measure


Voltage (AC)

N/A 120, 240 V


N/A 50/60 Hz


N/A 5 A


N/A Single

Air Consumption

N/A 0 - 4 CFM

Air Pressure

N/A 60 - 90 psi

Labeling Speed

N/A 1500-3000 in/min

Product Sensing

N/A Retroreflective scanner provided as standard, other types available

Min. Air Blow Label Size

N/A 3/4" Wide x 3/4" L

Min. Merge Label Size

N/A 3/4" Wide x 3/4" L

Min. Temp Label Size

N/A 3/4" Wide x 3/4" L

Max. Air Blow Label Size

N/A 7.5" Wide x 9" L

Max. Merge Label Size

N/A 10" wide x 20" L

Max. Temp Label Size

N/A 10" wide x 10" L

Max. Label Roll Size

N/A 12" O.D. x 3" I.D. Core

Label Roll Size

N/A 16" O.D. x 3" I.D. Cores 20" O.D. x 6" I.D. Cores

Label Placement

N/A ±1/32 in

Air Blow Dimensions

N/A 28" wide x 24" Tall x 27 1/2" Deep

Merge Dimensions

N/A 29" wide x 25" Tall x 27 1/2" Deep

Tamp Dimensions

N/A 28" wide x 22 1/2" Tall x 27 1/2" Deep


N/A Left Hand (LH) Tamp LH Air Blow LH Merge RH Air Blow RH Merge Right Hand (RH) Tamp


N/A Stepper Motor
The 360 stepper drive uses a micro pulse driver for increased accuracy and performance, and is programmable to dispense labels at up to 3000 inches per minute.

The 360a features a combined power supply, amplifier and position controller to comprise a single drive package. The new single axis digital stepper / servo controller controls up to five tasks simultaneously plus management of variables with expanded I/O making this drive well-suited for the most demanding production applications. The 360a controller is also equipped with onboard I/O prewired to external connectors to accommodate the following:

  • Low label single, double or triple lightstack
  • Web break encoder velocity compensation
  • Loose loop control product shape profiling
  • Imprinting zero downtime configuration
Each machine is shipped preprogrammed and can have the additional hardware installed at a later date for simple “plug n play” operations. The electronic control assembly is packaged as a module and can be easily removed for repair or replacement, eliminating costly downtime and servicing.

Operator Interface
The 6’’, 256 color, TFT touch screen operator interface provides a bold, bright, high contrast display with self-diagnostic platforms and multi-level intuitive set-up features.



  827 Lincoln Ave, Unit 6– West Chester, PA 19380 | Toll Free : 1.800.745.3530 | Phone : 610.719.8010 | Fax: 610.719.8013
Catalog Index | Terms and Conditions | [email protected]
Apogee Southern U.S. Representative : P.O. BOX 417 Crowley, TX 76036
  Copyright © 2011-2014 Apogee Industries Inc.  All Rights Reserved Website by B2B Design & Development LLC