This labeler is now available in a form fill and seal (FFS) version. The new 360FFS is designed for most form, fill and seal applications along with those applications that allow for a limited amount of space for the labeler. Application needs change? No problem, the 360FFS has an adjustable snorkel that adjusts the applicator's labeling point from 18" to 30". Just one more example of the versatility of the CTM 360 Series workhorse line.
Unit of Measure

Specifications

Voltage (AC)

N/A 108 - 132 V

Frequency

N/A 50/60 Hz

Current

N/A 10 A

Phase

N/A Single

Air Consumption

N/A 0 - 4 CFM

Air Pressure

N/A 60 - 90 psi

Labeling Speed

N/A 1500 in/min

Product Sensing

N/A Retroreflective scanner provided as standard, other types available

Min. Air Blow Label Size

N/A N/A

Min. Merge Label Size

N/A N/A

Min. Temp Label Size

N/A N/A

Max. Air Blow Label Size

N/A N/A

Max. Merge Label Size

N/A N/A

Max. Temp Label Size

N/A N/A

Max. Label Roll Size

N/A 12" O.D. x 3" I.D. Core

Label Roll Size

N/A 16" O.D. x 3" I.D. Cores 20" O.D. x 6" I.D. Cores

Label Placement

N/A ±1/32 in

Air Blow Dimensions

N/A 22 1/2" tall x 27 1/2" deep x 35 1/4" to 47 1/4" Adjustable Length

Merge Dimensions

N/A 29" wide x 25" Tall x 27 1/2" Deep

Tamp Dimensions

N/A 28" wide x 22 1/2" Tall x 27 1/2" Deep

Type

N/A Left Hand (LH) Tamp LH Air Blow LH Merge RH Air Blow RH Merge Right Hand (RH) Tamp

Detail

N/A Stepper Motor
The 360 stepper drive uses a micro pulse driver for increased accuracy and performance, and is programmable to dispense labels at up to 2100 inches per minute.

Control
The 360 is equipped with state-of-the-art electronics featuring a Dual Microprocessor control - One 32-bit processor supervises the application program while a digital signal processor (DSP) supervises the motion loop resulting in faster response times and improved application accuracy. The 360 controller is also equipped with onboard I/O pre-wired to external connectors to accommodate the following:

  • Low label - tamp home and extend switching
  • Web break - encoder velocity compensation
  • Loose loop - control product shape profiling
  • Imprinting - zero downtime configuration
Each machine is shipped preprogrammed and can have the additional hardware installed at a later date for simple "plug n play" operations. The electronic control assembly is packaged as a module and can be easily removed for repair or replacement, eliminating costly downtime and servicing.

Operator Interface
The self-prompting user-friendly display control comes with an easy to read, 4 line, 40 character LCD display. Dedicated soft keys allow quick access to the most frequently used set up parameters, thus eliminating lost time searching through complicated menus.

 

 

 
 
 
  827 Lincoln Ave, Unit 6– West Chester, PA 19380 | Toll Free : 1.800.745.3530 | Phone : 610.719.8010 | Fax: 610.719.8013
Catalog Index | Terms and Conditions | [email protected]
Apogee Southern U.S. Representative : P.O. BOX 417 Crowley, TX 76036
 
  Copyright © 2011-2014 Apogee Industries Inc.  All Rights Reserved Website by B2B Design & Development LLC