The 3600-PA Dual Action Tamp (DAT) Printer Applicator is a high speed, thermal transfer labeler used to print and apply pressure sensitive labels that can be programmed for single or two panel labeling applications applied to various cartons, cases or pallets. The single panel can be applied to either the front or the side.

Sato or Zebra print engine integrated into the pplicator to print variable data.

Can be mounted in almost any position to apply labels to the leading, side or trailing panels of various products. Mounting can be oriented up or down depending upon label size and position on the product.

Short height actuator assembly allows the unit to reach over a conveyor to products which are not at the edge of the conveyor - 4" tall labels can be located 1/4" from the bottom of products.
Unit of Measure


Voltage (AC)

N/A 108 - 132 V


N/A 50/60 Hz


N/A 5 A


N/A Single

Air Consumption

N/A 3 - 5 CFM

Air Pressure

N/A 90 psi

Product Sensing

N/A Photoelectric, PLC Input

Print Width

N/A 0 - 6.6 in

Label Width

N/A 0 - 7.1 in


N/A Dependent Upon Line Configuration


N/A ~150 lbs


N/A Parallel RS 232

Operating Temperature

N/A 41 - 104 ºF5 - 40 ºC

Storage Temperature

N/A -4 - 104 ºF20 - 40 ºC

Printing Method

N/A Direct Thermal Thermal Transfer
Print Resolution1 N/A 203 dpi305 dpi600 dpi

Applicator Control

N/A Micro PLC with Operator Key-Pad and 2-Line Display



  • Right hand or left hand version for either side of conveyor
  • Up to 7.1" wide labels, up to 6.6" print width
  • Built-in bar codes and alpha-numeric fonts
  • Proven tamp-blow application
  • PLC control
  • User-friendly operator interface with easy-to-read LCD display
  • Quick access to set-up parameters
  • Rugged and versatile for standard and custom applications
  • Equipped with multiple onboard I/O signals prewired to external connectors

  • 1 Dependent Upon Print Engine