Operation
Round products are manually loaded onto the infeed magazine. The indexing starwheel will remove one product at a time from the infeed magazine with each indexing motion. Once products have been captured by the starwheel, they are indexed to the labeling station where a powered roller spins the product as the label is applied. Labeled products will then continue around the starwheel until they fall onto the exit chute where they will fall into a collection hopper (collection hopper or box is not included).
Round products are manually loaded onto the infeed magazine. The indexing starwheel will remove one product at a time from the infeed magazine with each indexing motion. Once products have been captured by the starwheel, they are indexed to the labeling station where a powered roller spins the product as the label is applied. Labeled products will then continue around the starwheel until they fall onto the exit chute where they will fall into a collection hopper (collection hopper or box is not included).
Unit of Measure
Specifications
Actual Labeling Rate |
N/A 0 - 50 ppm |
Label Dispense Speed |
N/A 225 - 330 in/min |
Max. Label Size |
N/A 5.0" Wide x 8.0" L |
Min. Label Size |
N/A 0.5" Wide x 0.5" L |
Roll Outer Diameter |
N/A 12 in16 in |
Roll Inner Diameter |
N/A 3 in |
Label Sensing |
N/A Photoelectric |
Max. Diameter |
N/A 2.500 in |
Min. Diameter |
N/A 0.313 in |
Max. Length |
N/A 6.000 in |
Min. Length |
N/A 0.750 in |
Voltage (AC) |
N/A 120 V |
Frequency |
N/A 50/60 Hz |
Current |
N/A 7 A |
Air Consumption |
N/A 2 CFM |
Air Pressure |
N/A 80 psi |
Crated Shipping Weight |
N/A ~250 lbs |
Labeler Height |
N/A ~40.000 in |
Labeler Width |
N/A ~48.000 in |
Labeler Depth |
N/A ~25.000 in |
Option |
N/A Additional Starwheels Clear Label Sensing Hot Stamp Imprinters Loose Loop Integration With Thermal Printers |
Features
N/A
|