APOGEE INDUSTRIES INC.
827 Lincoln Ave
Unit 6
West Chester, PA 19380
Phone: 610-719-8010
Fax: 610-719-8013
[email protected]
Print Back
For those looking for an all-purpose solution for your needs, the 360a Series Label Applicator is the evolution of the industry standard 360 Series. No matter the type of applicator you need, the 360a Series is extremely versatile with the ability to configure the label applicator as a merge, blow-on or tamp-blow applicator. The design of the applicator is ambidextrous, allowing you to quickly and easily switch hands with little to no change.
Unit of Measure

Specifications

Brands

 N/A CTM

Air Consumption at 60 to 90 Pound Per Square Inch (psi) Pressure

 N/A Up to 4 ft³/min

Label Placement (±)

 N/A 1/32 in

Types of Modules

 N/A Air Blow Tamp

Labeling Speed

 N/A Programmable to 3000 inches per minute with secondary unwind and vacuum takeaway. Programmed with speed profiling ability.

Product Sensing

 N/A Retroreflective scanner provided as standard, other types available.

Electrical

Alternating Current Voltage (VAC) Rating

 N/A 120 V240 V

Frequency

 N/A 50 Hz60 Hz

Phase

 N/A Single

Current

 N/A 5 A

Label Sizes

Minimum Air Blow Label Width

 N/A 3/4 in

Minimum Air Blow Label Length

 N/A 3/4 in

Maximum Air Blow Label Width

 N/A 7.5 in

Maximum Air Blow Label Length

 N/A 9 in

Minimum Merge Label Width

 N/A 3/4 in

Minimum Merge Label Length

 N/A 3/4 in

Maximum Merge Label Width

 N/A 10 in

Maximum Merge Label Length

 N/A 20 in

Minimum Tamp Label Width

 N/A 3/4 in

Minimum Tamp Label Length

 N/A 3/4 in

Maximum Tamp Label Width

 N/A 10 in

Maximum Tamp Label Length

 N/A 10 in

Label Roll Size

Maximum Label Roll Outside Diameter

 N/A 12 in

Maximum Label Roll Core Inside Diameter

 N/A 3 in

Optional Label Roll Outside Diameter

 N/A 16 in20 in

Optional Label Roll Core Inside Diameter

 N/A 3 in6 in

Dimensions

Air Blow Width

 N/A 28 in

Air Blow Height

 N/A 24 in

Air Blow Depth

 N/A 27-1/2 in

Merge Width

 N/A 29 in

Merge Height

 N/A 25 in

Merge Depth

 N/A 27-1/2 in

Tamp Width

 N/A 28 in

Tamp Height

 N/A 22-1/2 in

Tamp Depth

 N/A 27-1/2 in

Features

Features

 N/A The 360a Series Label Applicator evolved from the industry standard 360 Series Platform. The 360a can be configured as a merge, blow-on or tamp-blow applicator, 5", 7.5" or 10" widths and each module can also be easily switched to the opposite hand with few or no change parts in a minimum amount of time. All units are stepper motor driven to include State-of-the-art electronics and a "Self-teaching" label sensor. File encryption of the 360a allows for easy "on-site" software revisions and upgrades.

Stepper Motor

Stepper Motor

 N/A The 360 stepper drive uses a micro pulse driver for increased accuracy and performance, and is programmable to dispense labels at up to 3000 inches per minute.

Controls

Controls

 N/A The 360a features a combined power supply, amplifier and position controller to comprise a single drive package. The new single axis digital stepper / servo controller controls up to five tasks simultaneously plus management of variables with expanded I/O making this drive well-suited for the most demanding production applications. The 360a controller is also equipped with onboard I/O prewired to external connectors to accommodate the following:

Low label: Single, double or triple lightstack
Web break: Encoder velocity compensation
Loose loop control: Product shape profiling
Imprinting: Zero downtime configuration

Each machine is shipped preprogramed and can have the additional hardware installed at a later date for simple "plug-n-play" operations. The electronic control assembly is packaged as a module and can be easily removed for repair or replacement, eliminating costly downtime and servicing.

Operator Interface

Operator Interface

 N/A The 6", 256 color, TFT touch screen operator interface provides a bold, bright, high contrast display with self-diagnostic platforms and multi-level intuitive set-up features.