APOGEE INDUSTRIES INC.
827 Lincoln Ave
Unit 6
West Chester, PA 19380
Phone: 610-719-8010
Fax: 610-719-8013
[email protected]
Print Back
The CTM Continuous Feed Dual Unwind (CFUD) is a stand alone unit designed to eliminate down time associated with supply roll changeover and help increase production speeds.

The CFUD is equipped with low label and end of web alarms with a strobe light indicator as standard features. There is a dual manual clamping system on the splicing table. These features maximize use of label material.
Unit of Measure

Electrical

Voltage (AC)

 N/A 120 V

Frequency

 N/A 50/60 Hz

Current

 N/A 10 A

Media Specifications

Maximum Linear Dispensing Speed

 N/A 0 - 3000 in/min

Roll Capacity

Roll Type

 N/A Dual Supply Roll

Roll Outer Diameter

 N/A 20 in

Roll Inner Diameter

 N/A 3 in

Specifications

Maximum Web Width

 N/A 7.5 in

Electronics

 N/A PLC controlled

Crated Shipping Weight

 N/A ~756 lbs

Option

 N/A Core Adapters

Dimensions

Width

 N/A 47 in

Depth

 N/A 27 in

Height

 N/A 56.5 in

Features

N/A

  • Right and Left Hand Available
  • PLC Controlled
  • Dancer Arm Tension Control
  • PLC Enhanced Braking System
  • Variable Speed Dispense Rate
  • Low Label Alarm
  • End of Web Alarm
  • Dual Manual Clamping System on Splicing Table

Additional Information

Additional Information

 N/A Continuous feed dual unwinds improve the efficiency and lost time of any roll-fed labeler by providing nonstop, uninterrupted label supply at high speeds. The continuous feed dual unwind functions as a standard loose loop controlled powered unwind. When the supply roll in use unwinds to a Predetermined level, a sensor activates a warning light and signals the drive to feed the remaining labels into a holding bin. The second roll of labels is then spliced to the end of the web as the labels in the bin are consumed. The operator completes the changeover by reloading the empty station and resetting the system for the next changeover.