Item # 3600ST Servo Tamp Printer Applicator, Print and Apply Labeling Systems
For those that require a heavy-duty print and apply labeling solution, the 3600ST is designed with that in mind. Its construction is made to last, and it’s available for both tamp blow and all electric tamp applications.
Power Supply Alternating Current Voltage (VAC) Frequency
50 Hz 60 Hz
Current
7 A
Operating and Environmental
Operating Environment Temperature
41 to 104 ºF 5 to 40 ºC
Storage Environment Temperature
-4 to 104 ºF -20 to 40 ºC
Pneumatic
Air Pressure
90 to 100 psi
Product Specifications
Label Width
Up to 7.1 in
Printing Specifications
Printing Method
Direct Thermal Thermal Transfer
Printing Capabilities
Alpha-Numeric
Dimensions
Length
33 in
Width
27.25 in
Height
43.5 in
Operator Interface
The 6", 256 color, TFT touch screen provides bold, bright, high contrast display with self-diagnostic platforms and multi-level intuitive set-up features, offering quick access to set-up selection for application operating parameters.
Features
Small and large labels up to 7.1" wide can be accommodated with its built-in bar codes and alpha-numeric fonts and 203, 305 or 600 dpi print resolution.
Various onboard I/O signals are pre-wired to an external connector; optional features may be added in the field with minimum investment.
Label Size Range for Sato is 1.0" wide x 1/4" long minimum to 6.5" wide x 10" long maximum, for Zebra is 5/8" wide x 1/2" long minimum to 7.1" wide x 10" long maximum, for Datamax is 1.0" wide x 1/4" long minimum to 6.64" wide by 10" long maximum.
Print Resolution and Speed are 203 dpi, 305 dpi, 600 dpi with print speeds programmable up to 16"/sec, dpi dependent. Print capabilities include fonts of various sizes and styles with independent height and width expansion; includes OCR A/B.
The Graphics feature supports user defined fonts and graphics including custom logos. Labeling speed is dependant upon label size, print speed, cylinder stroke and application type.
Standard machine features heavy duty construction for both Tamp Blow and All Electric Tamp, external valves (Tamp Blow unit only - All Electric Tamp does not require valve bank), operator keypad and display, 12" O.D. label roll, i/o connection and communication port connections.
Optional Features
16 in. Unwind for Large Label Rolls Low Label/Low Ribbon Out of Label/Out of Ribbon Red, Amber, Green "Ready" Light Stack Variable Height Sensing
