Brands |
N/A CTM |
Print Resolution |
N/A 203 dpi305 dpi400 dpi609 dpi |
Communications |
N/A Ethernet Parallel Serial USB Wireless Data Communication |
Sensor Type |
N/A Self-Teaching |
Motor |
N/A Stepper |
Approximate Weight |
N/A 165 lb |
Alternating Current Voltage (VAC) Rating |
N/A 108 to 132 V |
Phase |
N/A Single |
Power Supply Alternating Current Voltage (VAC) Frequency |
N/A 50 Hz60 Hz |
Current |
N/A 7 A |
Operating Environment Temperature |
N/A 41 to 104 ºF5 to 40 ºC |
Storage Environment Temperature |
N/A -4 to 105 ºF-20 to 40 ºC |
Air Pressure |
N/A 90 psi |
Approximate Air Flow Capacity |
N/A 3 to 5 ft³/min |
Air Quality |
N/A Clean Dry |
Note for Pneumatic |
N/A If Needed |
Type |
N/A Left Hand Version Right Hand Version |
Print Width |
N/A Up to 6.6 in |
Label Width |
N/A Up to 7.1 in |
Labeler Control |
N/A Digital Stepper Servo Controller |
Features |
N/A With the rugged, versatile 360a applicator is the custom designed, integrated print and apply loose loop with an OEM print engine to provide for merge, tamp blow or air blow labeling of print and apply labels or for applying pre-printed labels. |
Optional Features |
N/A End of Ribbon End of Web Low label Low Ribbon Stack light (silent or audible) |
Note for Optional Features |
N/A Consult CTM Labeling Systems for other options |
For Print and Apply Labels |
N/A Upon start-up the labeler prints and fills the loose loop to the applicator assembly and positions a label at the peel edge and is at idle condition; filling the loose loop dancer places the printer into a "pause" condition. Upon product detection the applicator will dispense and apply a label to the product; with additional label applications the loose loop dancer roller will move to actuate a feed sensor to release the "pause" mode of the printer which then advances more labels to refill the loop until the "pause" mode. |
For Pre-Printed Labels |
N/A
The print engine is "off" and the label web is routed to bypass the printer to feed directly to the peel bar for application. All 360a units are stepper motor driven with State-of-the-art electronics and a "Self-teaching" label sensor. File encryption of the 360a allows for easy "on-site" software revisions and upgrades. The digital stepper / servo controller manages multiple tasks simultaneously plus variables with expanded I/O making this drive well-suited for the most demanding production applications. The 360a is also equipped with onboard I/O prewired to external connectors to accommodate the following: low label single, web break, triple lightstack, encoder velocity compensation, and others. Set-up is easy, repeatable and stable with the color touch screen HMI display for operator access to set-up parameters. Integrated into the applicator is a Sato, Zebra or Datamax thermal transfer print engine for variable data with bar codes, alpha-numerics and graphics. Mounting can be in almost any position- up, down, reels up or upright depending upon label size and orientation on the product. Normal and fine detail printing is available with a choice of 203, 305, 400 and 609 dpi print resolutions, depending on manufacturer. Right hand and left hand versions are offered with label capabilities up to 7.1" wide, up to 6.6" print width, and the print engines offer Serial, Parallel, Ethernet, USB or wireless data communication. |
