The 360 Series Label Applicator is a rugged, versatile labeler loaded with standard features not found on most other applicators. The 360 can be configured as a merge, blow-on or tamp-blow applicator and each module can also be easily switched to an opposite hand with no change parts in a minimum of time. The 360 is available in 5", 7-1/2" and 10" widths and all units are stepper motor driven and include Dual Microprocessors, State-of-the-art electronics, intelligent control equipped with onboard I/O, and a "Self-teaching" label sensor.
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1 

Item #

Voltage (AC)

Frequency

Current

Labeling Speed

Min. Air Blow Label Size

Min. Merge Label Size

Min. Temp Label Size

Max. Air Blow Label Size

Max. Merge Label Size

Max. Temp Label Size

Max. Label Roll Size

360 Series Label Applicator N/A 108 - 132 V N/A 50/60 Hz N/A 10 A N/A 1500 - 2100 in/min N/A 3/4" Wide x 3/4" L N/A 3/4" Wide x 3/4" L N/A 3/4" Wide x 3/4" L N/A 5" Wide x 5 1/2" L N/A 5" wide x 20" L N/A 5" wide x 10" L N/A 20" O.D. x 3" I.D. Core
360A Series Label Applicator N/A 120, 240 V N/A 50/60 Hz N/A 5 A N/A 1500-3000 in/min N/A 3/4" Wide x 3/4" L N/A 3/4" Wide x 3/4" L N/A 3/4" Wide x 3/4" L N/A 7.5" Wide x 9" L N/A 10" wide x 20" L N/A 10" wide x 10" L N/A 12" O.D. x 3" I.D. Core
360FFS Form, Fill and Seal Labeler N/A 108 - 132 V N/A 50/60 Hz N/A 10 A N/A 1500 in/min N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 12" O.D. x 3" I.D. Core
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1 

 

 

 
 
 
  827 Lincoln Ave, Unit 6– West Chester, PA 19380 | Toll Free : 1.800.745.3530 | Phone : 610.719.8010 | Fax: 610.719.8013
Catalog Index | Terms and Conditions | [email protected]
Apogee Southern U.S. Representative : P.O. BOX 417 Crowley, TX 76036
 
  Copyright © 2011-2014 Apogee Industries Inc.  All Rights Reserved Website by B2B Design & Development LLC