Request Information
Whether you need a single panel or two panel label for your packaging, the 3600a-PA DAT is capable of providing the adequate solution for your needs. Each machine can be programmed to both print and apply single or dual panel label applications for any carton, case or pallet that requires ancillary information.
Unit of Measure

Specifications

Brands

 N/A CTM

Print Resolution

 N/A 203 dpi305 dpi600 dpi

Communications

 N/A Parallel RS 232

Note for Communications

 N/A Others Available

Barcode

 N/A CODABAR Code 128 Code 39 Code93 DataMatrix EAN 8/13 I 2 of 5 Maxicode MicroPDF MSI OCR A/B Others PDF417 Postnet™ UPC A/E (with Extensions)

Approximate Weight

 N/A 150 lb

Electrical

Alternating Current Voltage (VAC) Rating

 N/A 108 to 132 V

Phase

 N/A Single

Power Supply Alternating Current Voltage (VAC) Frequency

 N/A 54 Hz60 Hz

Current

 N/A 5 A

Operating and Environmental

Operating Environment Temperature

 N/A 41 to 104 ºF5 to 40 ºC

Storage Environment Temperature

 N/A -4 to 104 ºF-20 to 40 ºC

Pneumatic

Air Pressure

 N/A 90 psi

Approximate Air Flow Capacity

 N/A 3 to 5 ft³/min

Product Specifications

Print Width

 N/A Up to 6.6 in

Label Width

 N/A Up to 7.1 in

Labeler Control

 N/A Programmable Logic Controller (PLC)

Printing Specifications

Printing Method

 N/A Direct Thermal Thermal Transfer

Printing Capabilities

 N/A Alpha-Numerics Barcodes Graphics

Dimensions

Dimensions

 N/A Dependent Upon Line Configuration

Features

Features

 N/A The unit can be mounted in almost any position to apply labels to the leading, side or trailing panels of various products, and can be oriented reels up, nose up or down depending upon label size and position on the product.

The short height actuator assembly allows the unit to reach over a conveyor to products which are not at the edge of the conveyor - 4" tall labels can be located 1/4" from the bottom of products.

Right hand or left hand versions available for either side of conveyor or for leading or trailing end panels.

Datamax, Sato or Zebra print engines are integrated into the applicator to print variable data.

Labels as large as 7.1" wide, up to 6.6" print width can be accommodated with its built-in barcodes and alpha-numeric fonts and 203, 305 or 600dpi print resolution.

The 3600a plc control includes a remote 4.3" color touchscreen operator interface display, user friendly and easy to read with an intuitive menu structure for operating parameters, and I/O diagnostics for use in labeler setup and troubleshooting of interface connectivity. An enhanced set up and testing capability provides for feeding of blank labels. Multi-layers of password protection offer security at operator and technical access levels. Remote mounting allows convenient locating regardless of labeler position or attitude.

The operating program includes an encoder based Velocity Compensation feature for improved label placement accuracy at varying process line speeds. Print capabilities include fonts of various sizes and styles with independent height and width expansion. The Graphics feature supports user defined fonts and graphics including custom logos. Labeling Speed is dependent upon label size, print speed and application type.

Standard Machine Features include Heavy Duty Construction, Tamp Blow Applicator, External Valves and Controls, Remote Operator Color Touchscreen Display, 12" O.D. Label Roll. Various onboard I/O signals are pre-wired to an external connector; additional built-in ports allow optional features to be added in the field with minimum investment.

Optional Features

 N/A "Ready" Stack Light End of Web Low Label/Low Ribbon Out of Label/Out of Ribbon