• Item Image Thermal Transfer

    • Industry standard roll length thermal transfer labels are available with or without horizontal perfs between labels (style numbers ending with a "P" designate a horizontal perf between every label).
    • Labels designed for use in all standard size, table-top thermal transfer printers that accept maximum 8" OD rolls with labels wound out (unless noted) on 3" cores.

  • Item Image Thermal Transfer
  • Item Image Thermal Transfer
  • Item Image Thermal Transfer
  • Item Image Thermal Transfer

    Thermal transfer tags are in roll form, on 3" cores. Ribbons are sold and packaged separately. 7pt Tag Stock, Non-Pressure Sensitive.

  • Direct Thermal

    Direct thermal items available with a perf between each label are noted with a " P" at the end of the style number.

  • Direct Thermal

    Direct thermal small roll labels with standard permanent adhesive, perf between each label , 1" cores , 4" diameter rolls.

  • Item Image Thermal Transfer

    Provide a ribbon that helps your customer maintain and extend expensive print head life.

    All items listed herin are stock items and ship within 24 to 48 hours. Please contact Apogee for hundreds of other non-stock and specialty ribbons. Also contact us for small case (6 or 12 rolls) pricing.

    TERMS:

    1. Stock items may be returned within 90 days of purchase with a 25% restocking fee.
    2. All returns must have prior approval and be assigned a "Return Material Authorization Number". RMA #'s will expire if product has not been received at Apogee within 30 days from issuance.

  • Laser Labels

    All stock table-top & new universal weight bulk pack laser sheets are face edge-trimmed for superior feed performance. edge trimming removes approximately 1/32" of face stock and adhesive from the perimeter of the sheet. this prevents accumulation of adhesive in the laser printer and feed tray, minimizing feed jams and reduces your customer's maintenance frequency and expense.

    • Sheet size is 8-1/2" x 11" unless noted otherwise
    • Table-top laser labels & cards are packaged 100 sheets per shrink-wrapped pack (tray) with up to 1M sheets per outer carton orders of less than 1M sheets have a tray lid on each 100 pack - orders of 1m sheets or more have no tray lids unless specified on the po
    • When ordering: 1M = one thousand sheets / 1H = one hundred sheets

  • Laser Labels
  • Laser Labels

    Available in Red, Pink, Orange, Green , & Chartreuse Approved for use in InkJet Printers.

  • Laser Labels

    Laser cards sheeted 7 point uncoated tag stock- non-pressure sensitive.

  • Laser Labels

    High volume users want less packaging. They also use laser printers that perform more consistently with a slightly heavier weight sheet. Our Universal Weight, 50/50 Sheet (50# liner/50# Face) is a perfect fit for this type of laser printing. Our Universal Weight, Bulk Pack Lasers are Edge Trimmed for Superior Feed Performance. They are packaged in a 250 sheet chip board tray for additional corner/edge protection and shrink wrapped to maintain optimum moisture level content.

    8 1/2" X 11" Sheets, 1M Sheets Per Box - 250 Sheets Per Shrink Wrap Tray.

  • Blank

    Stock Terms: EDP, Laser, Thermal Transfer & Direct

    • All multiwide labels have vertical perforations between rows except cheshire labels which have no vertical perforation.
    • Stock EDP labels (except where noted) are of a 50lb smudgeproof face stock over a 50lb liner with standard permanent adhesive.

 

 

 
 
 
  827 Lincoln Ave, Unit 6– West Chester, PA 19380 | Toll Free : 1.800.745.3530 | Phone : 610.719.8010 | Fax: 610.719.8013
Catalog Index | Terms and Conditions | [email protected]
Apogee Southern U.S. Representative : P.O. BOX 417 Crowley, TX 76036
 
  Copyright © 2011-2014 Apogee Industries Inc.  All Rights Reserved Website by B2B Design & Development LLC