Request Information
For those that require a heavy-duty print and apply labeling solution, the 3600ST is designed with that in mind. Its construction is made to last, and it’s available for both tamp blow and all electric tamp applications.
Unit of Measure

Specifications

Brands

 N/A CTM

Print Resolution

 N/A 203 dpi305 dpi600 dpi

Communications

 N/A Ethernet Others Available Parallel RS 232

Air Flow Capacity

 N/A 4 ft³/min

Barcode

 N/A CODABAR Code 128 Code 39 Code 93 DataMatrix EAN 8/13 I 2 of 5 Maxicode MicroPDF MSI PDF417 Postnet™ UPC A/E (with Extensions)

Approximate Weight

 N/A 195 lb

Electrical

Alternating Current Voltage (VAC) Rating

 N/A 108 to 132 V

Phase

 N/A Single

Power Supply Alternating Current Voltage (VAC) Frequency

 N/A 50 Hz60 Hz

Current

 N/A 7 A

Operating and Environmental

Operating Environment Temperature

 N/A 41 to 104 ºF5 to 40 ºC

Storage Environment Temperature

 N/A -4 to 104 ºF-20 to 40 ºC

Pneumatic

Air Pressure

 N/A 90 to 100 psi

Product Specifications

Label Width

 N/A Up to 7.1 in

Printing Specifications

Printing Method

 N/A Direct Thermal Thermal Transfer

Printing Capabilities

 N/A Alpha-Numeric

Dimensions

Length

 N/A 33 in

Width

 N/A 27.25 in

Height

 N/A 43.5 in

Operator Interface

Operator Interface

 N/A The 6", 256 color, TFT touch screen provides bold, bright, high contrast display with self-diagnostic platforms and multi-level intuitive set-up features, offering quick access to set-up selection for application operating parameters.

Features

Features

 N/A Small and large labels up to 7.1" wide can be accommodated with its built-in bar codes and alpha-numeric fonts and 203, 305 or 600 dpi print resolution.

Various onboard I/O signals are pre-wired to an external connector; optional features may be added in the field with minimum investment.

Label Size Range for Sato is 1.0" wide x 1/4" long minimum to 6.5" wide x 10" long maximum, for Zebra is 5/8" wide x 1/2" long minimum to 7.1" wide x 10" long maximum, for Datamax is 1.0" wide x 1/4" long minimum to 6.64" wide by 10" long maximum.

Print Resolution and Speed are 203 dpi, 305 dpi, 600 dpi with print speeds programmable up to 16"/sec, dpi dependent. Print capabilities include fonts of various sizes and styles with independent height and width expansion; includes OCR A/B.

The Graphics feature supports user defined fonts and graphics including custom logos. Labeling speed is dependant upon label size, print speed, cylinder stroke and application type.

Standard machine features heavy duty construction for both Tamp Blow and All Electric Tamp, external valves (Tamp Blow unit only - All Electric Tamp does not require valve bank), operator keypad and display, 12" O.D. label roll, i/o connection and communication port connections.

Optional Features

 N/A 16 in. Unwind for Large Label Rolls Low Label/Low Ribbon Out of Label/Out of Ribbon Red, Amber, Green "Ready" Light Stack Variable Height Sensing