The CTM split conveyor labeling system consists of two conveyors with a single motor to maintain speed
Unit of Measure
Specifications
|
Electrical
|
Speed
|
Operating and Environmental
|
Dimensions
|
Conveyer
|
Features
|
Standard Features
|
Optional Features
Electrical
Alternating Current Voltage (VAC) Rating |
N/A 108 to 132 V |
Optional Voltage |
N/A 208 V220 V |
Current |
N/A 10 to 20 A |
Frequency |
N/A 50 Hz60 Hz |
Phase |
N/A Single |
Operating and Environmental
Operating Environment Temperature |
N/A 40 to 105 ºF5 to 40 ºC |
Storage Environment Temperature |
N/A -4 to 105 ºF-20 to 40 ºC |
Dimensions
Approximate Variable Height |
N/A 75 in |
Approximate Variable Standard Length |
N/A 72 in |
Approximate Variable Custom Length |
N/A 96 in |
Approximate Weight |
N/A 1200 lb |
Features
Features |
N/A
The CTM split conveyor labeling system consists of two, 3ft. long conveyors positioned in-line driven with a single variable speed DC drive motor to maintain a common speed across a short transfer gap. This design allows not only top labeling with any of CTM's fine line of advanced 360a applicators or 3600a printer-applicators, but the gap allows the use of its merge applicator for wipe on labeling to the bottoms of various products such as trays and clamshells. The conveyors use 12" wide high friction white belting material for product traction and gap transfer, while a "v" section on the underside mates with a "v" grooved stainless steel bedplate for positive belt tracking; side frames are also stainless steel. Main frame and labeler mountings are "Steel-It" painted carbon steel with stainless steel as an Option. Bottom labeling for print and apply uses the CTM 360a merge labeler with integrated loose loop design. Standard speed is up to 100 ft./minute with option to 120 ft./min. A NEMA 4 enclosure mounted to the conveyor side frame includes an OSHA lock-out. An Optional encoder with splitter cable is used for speed following of both labelers. |
