Request Information
The CTM Front / Back / Wrap System is a fully automatic, high quality, competitively priced labeling system designed around the customer’s exact labeling need.
Unit of Measure

Specifications

Brands

 N/A CTM

Material

 N/A Stainless Steel

Electrical

Alternating Current Voltage (VAC) Rating

 N/A 108 to 132 V

Optional Voltage

 N/A 208 V220 V

Current

 N/A 10 to 20 A

Frequency

 N/A 50 Hz60 Hz

Phase

 N/A Single

Operating and Environmental

Operating Environment Temperature

 N/A 40 to 105 ºF5 to 40 ºC

Storage Environment Temperature

 N/A -4 to 105 ºF-20 to 40 ºC

Dimensions

Approximate Variable Height

 N/A 75 in

Approximate Variable Width

 N/A 96 in

Approximate Variable Length

 N/A 144 in

Approximate Weight

 N/A 1200 lb

Standard Conveyor Size

 N/A 2.3 to 18 in4 to 12 ft

Conveyer

Full Range Standard Conveyor Velocity

 N/A Up to 90 ft

Full Range Optional Conveyor Velocity

 N/A 120 ft

Features

Features

 N/A The CTM Front / Back / Wrap System is a fully automatic, high quality, competitively priced labeling system designed around the customer's exact labeling need. The unit is an open frame design that can accommodate any of CTM's fine line of advanced 360a or 3600a-PA "touch screen" applicators or print and apply units for merge, air blow and tamp blow label attachments.

The short pitch, high performance acetal chain allows low friction and dry running on the hard anodized, Polytetrafluoroethylene (PTFE) impregnated extruded aluminum side frames. Continuous t-slots provide easy component mounting and adjustability, and all labeler mountings include ball bushing traverse slides as standard.

To accommodate various products CTM appropriately sizes conveyors from 2.3" to 18" wide and from 4 ft. to 12 ft. as standard.

The top hold down belt is servo motor driven to precisely follow the conveyor velocity throughout it's full range up to 90 ft. per minute as standard, and to 120 ft. per minute optional.

Feed screw, belt aligner and meter wheel orienting and spacing devices develop the demanding accuracies required by challenging applications. A wrap belt assembly can be included for wrap around applications when required on the same process.

Standard Features

Standard Features

 N/A Nema 4 main enclosure
OSHA Lock-out
Slanted consolette operator station
Heavy duty welded tubular steel main frame
"Steel-It" paint
Heavy duty motor and gearbox
Aerotech servo, Maple Systems color touch screen display controls

Optional Features

Optional Features

 N/A Stainless steel frame
Encoder speed following for labelers
Stack lights
Label on product scanning and eject
Pneumatic - required with certain features
Consult CTM Labeling Systems for other options

Note

Note

 N/A System dimensions and options shown vary by application.