Request Information
For businesses that need an incredibly versatile applicator, the 360a FFS is the perfect solutions. The 360a Form, Fill and Seal applicator is made to handle a wide variety of applications, including those that allow limited space for the label applicator. What makes the 360a FFS unique is the adjustable snorkel that can change the labeling point anywhere from 18 inches to 30 inches. Due to its compact size, the machine is perfect for those products that require label applications in areas that would be difficult to reach when using a standard labeling applicator. Because the applicator is so versatile, you can still utilize the same assembly without worrying about moving or adjusting the applicator much.
Unit of Measure

Specifications

Brands

 N/A CTM

Air Consumption at 60 to 90 Pound Per Square Inch (psi) Pressure

 N/A Up to 4 ft³/min

Label Placement (±)

 N/A 1/32 in

Labeling Speed

 N/A Programmable to 1500 inches per minute, in excess of 100 labels per minute depending upon size.

Product Sensing

 N/A Retroreflective scanner provided as standard; plc signal from form, fill and seal unit may be used; custom inputs available.

Electrical

Alternating Current Voltage (VAC) Rating

 N/A 108 to 132 V

Frequency

 N/A 50 Hz60 Hz

Phase

 N/A Single

Current

 N/A 10 A

Label Roll Size

Maximum Label Roll Outside Diameter

 N/A 12 in

Maximum Label Roll Core Inside Diameter

 N/A 3 in

Optional Label Roll Outside Diameter

 N/A 16 in20 in

Optional Label Roll Core Inside Diameter

 N/A 3 in6 in

Dimensions

Height

 N/A 22-1/2 in

Depth

 N/A 27-1/2 in

Adjustable Length

 N/A 35-1/4 to 47-1/4 in

CTM 360FFS Highlights

CTM 360FFS Highlights

 N/A
  • Engineered to minimize the overall applicator size for those “tough to reach" labeling applications.
  • Adjustable snorkel length from 18" to 30" to encompass a wide range of labeling applications.
  • Stepper drive motor will dispense up to 1500 inches per minute of dispense speed.
  • "Auto Teach" label set-up for label length, label stop and label sensor sensitivity.
  • Labels per minute rate indicator.
  • Totalizing label counter for data management.

Features

Features

 N/A The 360a FFS Series Label Applicator is the most versatile, high performance industrial duty labeler on the market today. The 360 Series Label Applicator has understandably become the benchmark of labelers in its class due to its rugged and versatile design and standard features that are optional on most competitive machines. This labeler is now available in a form fill and seal (FFS) version. The new 360a FFS is designed for most form, fill and seal applications along with those applications that allow for a limited amount of space for the labeler. Application needs change? No problem, the 360a FFS has an adjustable snorkel that adjusts the applicator's labeling point from 18" to 30". Just one more example of the versatility of the CTM 360 Series workhorse line.