Request Information
This configured 3600a-PA print and apply label applicator takes the standard 3600a-PA Series model and adjusts the labeler swing arm to allow corner wrapping on various packages such as cartons and cases.
Unit of Measure

Specifications

Brands

 N/A CTM

Print Resolution

 N/A 203 dpi305 dpi400 dpi609 dpi

Communications

 N/A Ethernet Parallel Serial Universal Serial Bus (USB) Wireless Data Communication

Approximate Weight

 N/A 120 lb

Electrical

Alternating Current Voltage (VAC) Rating

 N/A 108 to 132 V

Phase

 N/A Single

Power Supply Alternating Current Voltage (VAC) Frequency

 N/A 50 Hz60 Hz

Current

 N/A 5 A

Operating and Environmental

Operating Environment Temperature

 N/A 41 to 104 ºF5 to 40 ºC

Storage Environment Temperature

 N/A -4 to 105 ºF-20 to 40 ºC

Pneumatic

Air Pressure

 N/A 90 psi

Approximate Air Flow Capacity

 N/A 3 to 5 ft³/min

Air Quality

 N/A Clean Dry

Product Specifications

Print Width

 N/A Up to 6.6 in

Label Width

 N/A Up to 7.1 in

Labeler Control

 N/A Micro Programmable Logic Controller (PLC)

Printing Specifications

Printing Method

 N/A Direct Thermal Thermal Transfer

Printing Capabilities

 N/A Alpha-Numerics Barcodes Graphics

Features

Features

 N/A This corner wrap panel labeler uses a Sato, Zebra or Datamax print engine integrated into the applicator to print variable data with barcodes, alpha-numerics and graphics, and can be mounted in almost any position- up, down, reels up or upright depending upon label size and orientation of the label on the product. Normal and fine detail printing is available with a choice of 203, 305, 400 and 609 dpi print resolutions, depending on manufacturer.

Right hand and left hand versions are offered for either side of the conveyor handling labels up to 7.1" wide, up to 6.6" print width. All 3600a-PA units are equipped with multiple onboard I/O signals prewired to external connectors, and the print engines offer Serial, Parallel, Ethernet, USB or wireless data communication.

The heavy duty, rack and pinion dual cylinder rotary actuator and custom designed swing arm length allows the unit to reach out to products which are not at the edge of the conveyor.

Set-up is easy, repeatable and stable with the micro plc controller with the color touch screen HMI display for operator access to set-up parameters.

Optional Features

 N/A Allen-Bradley plc End of Ribbon End of Web Low label Low Ribbon Stack light (silent or audible)

Note for Optional Features

 N/A Consult CTM Labeling Systems for other options